How to DIY Nipple Sex Toys at Home (Steps of Demonstration)

Today, we’re going to explore a simple DIY Nipple Sex Toys that can add some spice to your intimate moments. We’ll be discussing nipple clamps，nipple suckers etc. And how you can easily make them at home. Don’t worry; this isn’t rocket science. Think of it as a home repair project for your bedroom.

We’ll guide you through the process, and the materials you need are both affordable and accessible. So, let’s get started.

Table of Contents

Homemade Nipple Clamps

1.The Shower Curtain Clip

Step 1: Gather Your Materials

• Shower curtain clips (readily available and budget-friendly)
• A chain (the length is up to your personal preference)

Step 2: Remove the Old Clamps

Carefully detach the old clamps, which should be relatively easy to do. These old clamps, while no longer ideal for the task, might still serve a purpose if you ever want to switch back.

Step 3: Attach the Clips to the Chain

The shower curtain clips typically come with hooks, making this part of the process simple. Attach the hook to the chain and securely close it. If you find that it’s not holding as securely as you’d like, you can use a pair of needle-nose pliers to make sure they stay in place.

Step 4: Repeat for the Other End

For even pressure and control, make sure to attach a clip to both ends of the chain. This will ensure that the chain won’t slip off while in use.

2. Chopsticks Nipple Clamps

Step 1: Gather Your Materials

Grab Rubber Bands and two chopsticks from your kitchen drawer (often available for free from take-out).

Step 2: Wrap the Chopsticks

Take one chopstick and wrap the elastic rubber band tightly around one end. The goal is to create the desired level of sensation without causing discomfort or injury.

Step 3: Test Before Use

Test the clamps on a non-sensitive area of skin to ensure comfort and the desired level of stimulation.

Step 4: Smooth Edges

If necessary, use a light sanding tool to smooth out any rough edges or splinters on the chopstick nipple clamps.

Step5: Apply the Clamps

Adjusting the tightness of the rubber bands as desired. Communicate with your partner throughout the experience for comfort and enjoyment.

Please remember，remove the clamps immediately if they cause excessive pain or discomfort, avoiding extended wear.

3.Clothes Pegs

Supplies You’ll Need

1. Scissors (standard scissors are fine).
2. String (two options explained below).
3. Clothes pegs (bamboo clothespins recommended).

Choosing the Right String: You have two options when it comes to the type of string to use for your zipper:

1. Thin Black String: A 100% cotton string that is relatively strong, though not indestructible. While it may not be the toughest option, it’s ideal for one style of clamps and can be found easily.
2. Thin White Poly Rope: A braided, white poly rope that’s somewhat thicker and more durable. This choice is suitable for a different style of peg and is often used for various activities, such as CBT (Cock and Ball Torture).

How to DIY a Nipple clamps from Clothes Pegs

• Cut a length of thin white poly rope.
• Tie multiple overhand knots close together to create a secure attachment point for the clothes peg.
• Thread the rope through the spring and secure the clothes peg.
• Repeat these steps for all desired attachment points.
• Trim any excess rope.

DIY Nipple Suckers

1.Syringe

• Take a 20-60 ml syringe and remove the needle.
• Carefully cut off the tip of the syringe with a sharp knife or scissors.
• Position the syringe over your clitoris and gently pull back the plunger to create a vacuum.
• Maintain the position for a few minutes.

Remember to use a clean and sterile syringe and avoid excessive pressure to prevent damage to delicate tissues.

2.Glass Bottle

While using a glass bottle may seem intimidating at first, it can be an excellent DIY option with some preparation.

Safe Steps for Glass Bottle Use

1. Heat the tip of the glass bottle with hot water.
2. Gently place it over your nipple.
3. Let the air cool inside the bottle to create suction.

Be Cautious

Ensure you use a bottle with a wide enough opening to fit comfortably over your nipple. Be extremely careful not to break the glass.

The Right Temperature Matters

If the tip of the bottle becomes too hot, allow it to cool down before using it on your nipple again. The safety of the glass temperature is crucial. Avoid any risk of glass fragments getting ingrained in your skin.

Also Read:

Conclusion

In just a few easy steps, you’ve created your very own set of DIY Nipple Sex Toys. These homemade toys offer a little extra oomph in the bedroom compared to store-bought ones.So there you have it, a simple and fun DIY project to spice up your intimate moments. We hope you enjoyed this installment of The Leather Journey, and as always, thank you for watching.